Bed Length | 5'6" to 24' |
Admit between Centers | 1'9" (530) to 20'3" (6175) |
Bed Width | 12 3/4" (323) & 14 3/4" (374) |
Centre Height | 10" (254), 12" (305) &15" (381) |
Spindle Hole | 2-1/8" (54) to 6-1/8" (156) |
Hardened & Ground Bedways, Face Plate, Dog Chuck Plate, True Chuck Plate, Steady Rest, Follow Rest, Centre Adaptor, Dead Centre – 2 Nos., Tool Post Spanner, Change Gear Set for Whitworth and Metric Threads, Motor Pulley, Endless Flat Belt / V-Belt and Instructions & Spare Parts Manual.
Norton Gear Box, Taper Turning Attachment, Electric Motor, Coolant System, Rear Tool Post, Machine Lamp, Rear Splash Guard, Quick Change Tool Post with Tool Holders, Turcite-B coated Carriage Guideways for Bed, DP / Module Gears, Metric Pitch Screws, Chuck and Special Attachments as per Customers' requirements.
Model | Accurate | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
A | B | C | D | E | F | G | H | I | J | K | ||
Length of Bed | 5'6" (1670) |
7' (2130) |
9' (2740) |
10' (3040) |
12' (3650) |
14' (4260) |
16' (4870) |
18' (5480) |
20' (6090) |
22' (6700) |
24' (7300) |
|
Max. admit between Centers | 1'9" (535) |
3'3" (1000) |
5'3" (1600) |
6'3" (1900) |
8'3" (2515) |
10'3" (3125) |
12'3" (3735) |
14'3" (4345) |
16'3" (4955) |
18'3" (5560) |
20'3" (6170) |
|
Spindle Hole | Standard: 52 (2-1/8") | Optional: 3-1/8" (78), 4-1/8" (104), 6-1/8" (156) & 6-1/8" (156) | |||||||||||
Bed Type | 2V & 2 Flat | |||||||||||
Centre Height | 10" (254) | 12" (305) | 15" (381) | |||||||||
Max. Swing over Bed Dia | 19" (480) | 23" (585) | 29" (735) | |||||||||
Max. over Cross Slide Dia. | 14-3/4" BW | 11-1/2" (295) | 15-1/2" (395) | 21-1/2" (545) | ||||||||
12-3/4" BW | 11" (280) | 15" (380) | 21" (530) | |||||||||
Max. Swing without Gap Dia. | 31" (785) | 35" (890) | 41" (1040) | |||||||||
Width of Bed | 12-3/4" (323) | 14-3/4" (374) | ||||||||||
Nos. of Spindle Speed & Range | 8 (25 to 460 RPM) | |||||||||||
Tail Stock Spindle Dia. | 2-1/8" (54) | |||||||||||
Taper of Centers | MT-4 | |||||||||||
Tail Stock Spindle Travel | 7 1/2" (190) | |||||||||||
Cross Slide Travel | 10" CH | 11" (280) | 13" (330) | |||||||||
12" CH | 12-1/4" (310) | 13" (330) | ||||||||||
Compound Slide Travel | 6" (150 mm) | 8" (200) | ||||||||||
Tool Post Size (Square) | 5" x 5" | 5-3/4" x 5-3/4" | ||||||||||
Tool Shank Section | 25 x 25 | 32 x 32 | ||||||||||
Lead Screw Dia. & Pitch | Standard: 1-1/2" (38) / 4TPI | Optional: 1-3/4" (45) | |||||||||||
Width of Gap in front of Face Plate | 8" (200) | 9" (225) | ||||||||||
Nos. of Inch Threads & Range | 19 / 2 to 24 TPI | Optional: Norton Gear Box – 44 / 2 to 60 TPI | |||||||||||
Nos of Metric. Threads & Range | 13 / 1 to 6 MMP | Optional: Norton Gear Box – 24 / 0.5 to 15 MMP | |||||||||||
Nos. of DP Threads & Range | Optional: 11 (6 to 60) | |||||||||||
Nos. of Module Threads & Range | Optional: 12 (0.3 to 2) | |||||||||||
Nos. of Longitudinal Feeds | 32 / 0.16 to 2 mm/rev | Optional: Norton Gear Box – 68 / 0.068 to 2.4 mm/rev | |||||||||||
Nos. of Transverse Feeds | 32 / 0.038 to 0.48 mm/rev | Optional: Norton Gear Box - 68 / 0.016 to 0.57 mm/rev | |||||||||||
Power of AC Motor (HP) | 2 | 3 | 3 | 3 | 3 | 5 | 5 | 7.5 | 7.5 | 7.5 | 10 | |
Weight (Approx. in kgs) | 1300 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 | 2800 | 3300 | 3600 | 4000 |
Copyright © Accurate Machine Tools. All rights reserved.